Repository avatar
Other Tools
v0.2.0
active

bricscad-mcp

io.github.alesdev88/bricscad-mcp

Read, audit, edit, plot and batch-process BricsCAD drawings. Works at Lite level.

Documentation

BricsCAD MCP

An MCP server that lets Claude, or any MCP client, read, audit, edit, plot and export drawings in BricsCAD, one at a time or in batches. It starts its own BricsCAD window and controls it through a small LISP listener, so it works at every licence level, including Lite, and doesn't need Windows COM.

Status: all four phases are built: reading and auditing, drawing and editing, plotting and export, and batch jobs.

Platform support

PlatformServer logic testsReal BricsCAD testsStatus
macOSCIPassed on V26.1.6 LiteSupported
WindowsCIPassed on V25 LiteSupported
LinuxCINot run: no test machine yetExperimental

A platform becomes Supported only when the real BricsCAD tests pass on it. CI has no BricsCAD. The plot, export and batch tools (bricscad_export_dxf, bricscad_plot_pdf, bricscad_preview_image, bricscad_batch_run) have so far passed them on macOS only; on Windows they are untested. The Linux install location is unverified, so set BRICSCAD_EXECUTABLE if yours is not found.

Install

You need BricsCAD in every case.

Claude Desktop

Download the bundle for your computer from the latest release and open it:

  • macOS with Apple silicon: bricscad-mcp-<version>-darwin-arm64.mcpb
  • Windows: bricscad-mcp-<version>-win32.mcpb

The bundle brings its own Python, so there is nothing to install first. Its settings let you pick a BricsCAD version, or point to the program if it isn't found. On an Intel Mac, use the uvx setup below.

Claude Code, Codex and other clients

These run the server from PyPI with uv, so install uv first.

Claude Code:

claude mcp add bricscad -- uvx bricscad-mcp

Codex (the CLI, the IDE extension and the ChatGPT desktop app share this setting):

codex mcp add bricscad -- uvx bricscad-mcp

Cursor, VS Code, Windsurf and other clients that take an mcpServers entry:

{
  "mcpServers": {
    "bricscad": {
      "command": "uvx",
      "args": ["bricscad-mcp"],
      "env": { "BRICSCAD_VERSION": "26" }
    }
  }
}

env is optional. See Environment variables.

On a network that inspects HTTPS

Some office networks check HTTPS traffic with their own certificate. uv then can't download from PyPI unless it uses the system's certificates, and the first start fails with invalid peer certificate: UnknownIssuer, which a client may only report as a closed connection. Setting UV_SYSTEM_CERTS in your shell isn't always enough, because some clients start servers with only a few environment variables. Set it on the server entry instead:

claude mcp add -e UV_SYSTEM_CERTS=1 bricscad -- uvx bricscad-mcp
codex mcp add bricscad --env UV_SYSTEM_CERTS=1 -- uvx bricscad-mcp

In an mcpServers entry, add "UV_SYSTEM_CERTS": "1" to env. The Claude Desktop bundle downloads nothing, so it doesn't need this.

From source

git clone https://github.com/alesdev88/bricscad-mcp.git
cd bricscad-mcp && uv sync

Then register it, using the full path to your copy:

claude mcp add bricscad -- uv --directory "/full/path/to/bricscad-mcp" run bricscad-mcp

Tools

ToolWhat it does
bricscad_list_versionsLists installed versions
bricscad_start / bricscad_stopStarts or closes the server's own BricsCAD
bricscad_statusReports whether it's running, listener health and the current drawing
bricscad_open_drawing / bricscad_close_drawingOpens a DWG or DXF (read-only by default), or closes it
bricscad_drawing_infoName, path, state, units, entity count, layouts, and the limits and extents of the current layout
bricscad_list_layers / _blocks / _xrefs / _layoutsLists what's in the drawing
bricscad_query_entitiesFinds entities by type, layer, block, layout or bounding box
bricscad_get_entityReturns all DXF values for one entity
bricscad_read_attributesReads block attributes, such as title block contents
bricscad_find_textSearches TEXT, MTEXT, MULTILEADER, table cell and attribute text
bricscad_audit_reportEmpty layers, unused blocks, missing xrefs, raised entities, off-standard layer names
bricscad_create_entitiesDraws lines, polylines, circles, arcs, text, MTEXT, dimensions, hatches and block inserts
bricscad_modify_entitiesMoves, rotates, scales, or changes layer, color, linetype or text
bricscad_erase_entitiesErases entities by handle
bricscad_set_layerCreates or changes a layer
bricscad_set_attributesSets block attribute values, such as title block contents
bricscad_undoUndoes edit tool calls, one step each
bricscad_save_drawingSaves to a new path, or over the open file with overwrite=true
bricscad_export_dxfWrites the drawing as DXF, R12 or 2000 to 2018
bricscad_plot_pdfPlots the model or a sheet to PDF, with paper, orientation, area, scale and plot style
bricscad_preview_imageReturns a PNG of the model, a sheet or a window, so the client can check its work
bricscad_batch_runRuns one job on up to 500 drawings: audit, find text, export DXF, plot PDF (one sheet or every sheet), save copies, or LISP code
bricscad_run_lispRuns LISP for anything the other tools don't cover

List tools take limit and offset and report total. The default limit is 200 and the maximum is 2000.

Good to know

  • One copy per version. bricscad_start refuses if that BricsCAD version is already running, because a second copy of the same version doesn't start its listener. Close it first, or choose another version with BRICSCAD_VERSION.
  • The window is occupied. While the listener runs, its BricsCAD window isn't meant for hand use, and it may not show the open drawing. Trust the tools, not the window. Draw in a copy of another version, or stop the server first.
  • Dynamic blocks go by their own name. Their inserts are stored under anonymous names such as *U12. Block filters, insert counts and attribute results use the name you know.
  • bricscad_run_lisp is powerful. LISP can change or delete files and start programs, so every call goes through your client's tool approval.
  • Timeouts. If a dialog blocks BricsCAD, the call fails after its timeout (30 seconds by default) and says to check the window.
  • Batches. Run bricscad_batch_run with dry_run=true first to see what it would do. A failed file doesn't stop the batch, but a timeout does, because a dialog may be blocking BricsCAD. Afterwards the current drawing may be another open drawing. A batch takes up to 500 drawings per call.

Safety

  • Drawings open read-only by default.
  • Closing or stopping refuses if there are unsaved changes, unless you pass discard=true.
  • bricscad_stop only ever closes the copy this server started.
  • If the client exits, a copy with nothing unsaved closes by itself. A copy with unsaved work stays open so you can save it.
  • The server doesn't permanently change BricsCAD settings.
  • Each edit tool call is all-or-nothing and one undo step. Edits made through bricscad_run_lisp have no step of their own, so they go back with the step before them.
  • Entities on locked layers are refused, and missing layers are never created by drawing on them.
  • Saving over an existing file needs overwrite=true, and the server checks that before BricsCAD is involved. A read-only drawing can only be saved to a new path, a file open as another drawing or marked read-only is never replaced, and a replaced file leaves a .bak beside it.
  • Exporting, plotting and previews never change the drawing, not even its modified state. They refuse an existing file without overwrite=true, never write over an open drawing, and replace a file only once the new one is complete, with no .bak.
  • Batch jobs open their drawings read-only and never write them unless the output folder is their own folder and overwrite=true. Drawings already open in BricsCAD are refused, and each output replaces a file only once it is complete, with no .bak. Code in a lisp job can still save anywhere itself, as with bricscad_run_lisp.

Environment variables

VariablePurpose
BRICSCAD_VERSIONThe version to start, for example 26. Defaults to the newest installed
BRICSCAD_EXECUTABLEFull path to BricsCAD, if it isn't found automatically

Known limits

  • So far it has only been tested on drawings its tests created. Real project drawings may bring up dialogs that haven't been seen yet, such as missing fonts or proxy objects.
  • vla-save opens a dialog and vla-saveas fails on macOS, so use _.QSAVE and _.SAVEAS in LISP.
  • On Windows, BricsCAD's LISP holds text in the Windows code page (SYSCODEPAGE), not Unicode. Slovenian and other text in that code page works. LISP would turn characters outside it, such as Chinese on a Central European system, into ?, so the server refuses any call that contains them and names each one. It detects the code page when it starts BricsCAD.
  • Don't close the only open drawing with your own LISP, because the listener stops. bricscad_close_drawing handles this for you.
  • PDFs are plotted with Print As PDF.pc3 only. Paper sizes go by BricsCAD's own name, such as ISO A3 (297.00 x 420.00 MM); an unknown name is reported, not guessed.
  • Previews are the size of the BricsCAD window, and the model shows on black, as on screen.

Development

uv run pytest

These tests need no BricsCAD. To run the real tests, close that version of BricsCAD first. They open one copy at a time and use only temporary drawings:

uv run pytest -m bricscad

Passing them on Windows or Linux is what moves that platform to Supported.

Design and test results are in docs/: start with docs/superpowers/specs/2026-11-06-bricscad-mcp-design.md and docs/phase-0-results.md.

Releasing

  1. Set the new version in pyproject.toml, manifest.json and server.json, then run uv lock. A test checks that the three agree, and that manifest.json lists every tool.
  2. Push a tag for it, such as v0.1.0. The release workflow tests the commit, checks a fresh install of the wheel, builds both bundles, creates the GitHub release, publishes to PyPI and then to the MCP registry.
  3. Install each bundle on its platform before announcing the release. CI can't start them.

To build a bundle locally, uv run python scripts/build_bundle.py --target darwin-arm64 (or win32 or all). It needs Node for the mcpb packer; --no-pack stops before packing and leaves the unpacked bundle in build/.

PyPI publishing needs a trusted publisher on pypi.org for this repository, workflow publish.yml, environment left blank.

MCPB
https://github.com/alesdev88/bricscad-mcp/releases/download/v0.2.0/bricscad-mcp-0.2.0-win32.mcpb
Install Command
# mcpb: https://github.com/alesdev88/bricscad-mcp/releases/download/v0.2.0/bricscad-mcp-0.2.0-win32.mcpb
MCPB
https://github.com/alesdev88/bricscad-mcp/releases/download/v0.2.0/bricscad-mcp-0.2.0-darwin-arm64.mcpb
Install Command
# mcpb: https://github.com/alesdev88/bricscad-mcp/releases/download/v0.2.0/bricscad-mcp-0.2.0-darwin-arm64.mcpb